A non-contact flow sensor utilizes ultrasonic technology to measure flow rate at critical points of various biotech processes. Ultrasonic technology enables non-contact detection of flow, independent of liquid composition (color, viscosity, turbidity, charge, temperature, etc.).
XY-TEK’s ultrasonic flow sensors clamp onto the outside of flexible or rigid tubing, send the ultrasonic signal through the tubing, and directly measure flow while simultaneously calculating the total volume dispensed.
The addition of real-time flow measurement allows for increased insight into critical process parameters (CPP) that are necessary for optimal batch-to-batch consistency and reliability. By non-invasively monitoring a process, setup time can be reduced by eliminating the need for in-line sensor design.
In recent years, the biotech industry has shifted priorities toward maximizing process intensification by utilizing complete single-use systems. That very single-use process requires sterility at the point of delivery.
This limits the number of process analytical technology (PAT) devices that can be integrated. By adding a non-invasive flow sensor, a single-use process can still be intensified without additional validation of materials and complexity of design.

In a lot of medical devices and life support systems such as hemodialysis machines, artificial heart, organ transplantation systems, heart-lung machines, ECOM, and surgical robots, it is necessary to monitor the flow rate of blood, saline, urine, and liquid drugs to improve system safety and patients’ health.
XT-TEK’s non-contact flow sensors can measure flow in small tubing at low flow rates, and they are easy to install and disassemble. The sensors measure flow accurately and help identify potential risks in various medical operations.
For example, they can detect failures of dialysis equipment or flow connectors during surgery, and low blood flow and thrombosis in AVF/AVG caused by narrowing of blood vessels. They can monitor the status of pumps and the aging of tubing. All these help clinicians obtain more accurate diagnoses and avoid human operation errors on site.
In recent years, with the advancement of intelligent medical devices, the demand for non-invasive flow measurements is increasing quickly, not just in medical institutions, but also in daily home care and remote treatments.

An ultrasonic flow sensor utilizes the transit-time difference technology to non-invasively measure flow rates within flexible or rigid tubing. Ultrasound waves are propagated by matter and are sensitive to changes in such matter. These changes seen between the emitted ultrasound waves and received ultrasound waves are directly related to the velocity of any given liquid and allow for the calculation of the total volume.
The upstream and downstream sensors are piezoelectric crystals that transmit and receive the ultrasonic signal. The ultrasonic waves then propagate through the liquid at an angle relative to the axis of the tubing. The transit time in the upstream direction is always larger than that in the downstream direction when there is flow. The time difference in both directions is proportional to the mean flow velocity, and together with the tubing cross-section area information, the volume flow rate can be derived.
Additionally, since the XY-TEK flow sensor includes an upstream and downstream sensor element, it can measure bidirectionally.

A clamp-on flow sensor works with the most flexible tubing on the market. The most important aspect to consider when selecting a sensor is the Outer Diameter (OD).
For flexible tubing, sensors typically range in size from 0.25 inches up to 2 inches OD.
Another detail to consider is that the Inner Diameter (ID) must not be less than 50% of the OD. If the ID is less than 50% of the OD, the wall thickness is too great and the flow path is too small for accurate flow measurements.
Other metrics to consider when selecting an XY-TEK flow sensor–or any non-contact flow sensor – include tubing material, process temperature, fluid type, and flow rate.

Typically, there are three types of non-contact flow sensors for different tubing/flow rate applications such as:
1.Simple clamp-on for flexible/single-use tubing
2.Semi-permanent clamp-on for rigid tubing
3.A traditional in-line flow sensor for very low flow

XY-TEK's ultrasonic flow sensors come in three types:
1.CG series: For flexible and single-use tubing applications
2.CS series: For rigid tubing applications
3.TG series: For in-line ultra-low flow applications
Depending on your process conditions, XY-TEK can help find the right sensor for you.
Please contact us (CALL +86 21 33885752 or SEND E-MAIL to sales@xy-tek.cn) for a quick consultation.